MindPlus

UNIHIKER K10 with Mindplus(Mind+)¶

Mind+ is a software designed for teenagers that supports AI and IoT functions by integrating with popular mainboards and open-source hardware. It offers an easy programming experience through graphical building blocks and advanced languages like Python, C, and C++. In this tutorial, we will guide you through the process of downloading and installing Mindplus on your computer.

Download¶

Code¶

• Open Mind+ and switch to "Offline" mode.
  

• Click "Extension", in the extension page, click "Board", select "UNIHIKER K10", click "Back". Click "Back" to finish loading.
  

• Connect the USB-C port of K10 to the USB port of your computer, click “Connect Device” in mind+, find the corresponding K10 device and click it to complete the device connection.
  

• Cache text “Hello UNIHIKER K10” in different colors on line 2, line 4 and line 6 of K10 respectively. Then show cached content.
  

• Click "Upload" and wait for the program to finish uploading.
  

• After the program is successfully uploaded, the K10 screen displays the text "Hello, UNIHIKER" in different colors.

Factory Program¶

After uploading other programs, the factory program will be overwritten, if you want to re-experience the factory program, you can follow the process below:

• Download factory program
  
• Unzip the program and open it with Notepad/VSCode etc. and copy the entire contents.
  
• Paste it into the manual editing area of Mind+.
  
  
• Select the K10 and upload the code.

For more UNIHIKER K10 programming tips for Mind+, please visit Mind+ Example.

Mind+ Example¶

Click to the Mind+ Example.

Supported Sensors¶

At present, K10 only opens up some of the commonly used sensors, and the compatibility of more sensors will be iterated in subsequent versions.

Offical library¶

Sensor¶

Actuator¶

Communication¶

Display¶

Function¶

Network¶

User-extension¶

The compatibility of current sensors and small modules is still being optimized, and some of the sensors that have been optimized will first be opened for use through the user extension feature. If you would like any Gravity sensors to be compatible with the K10, please contact us via email. We will get back to you as soon as possible.
E-mail: unihiker@dfrobot.com