Download

Schematic¶

UNIHIKER K10 Schematic

3D Model¶

UNIHIKER K10 STP model UNIHIKER K10 STL model

Case¶

DFRobot official design case, a M3*5 screw is need to fix the case to the K10 board, the case expose all the interfaces of the K10.
UNIHIKER K10 case——released by DFRobot

Factory Programme¶

After uploading other programmes, the factory programme will be overwritten, if you want to re-experience the factory programme, you can follow the process below:

• Connect K10 to your PC and open "Mind+". Be sure the Mind+ is in the English mode.
  
• Select UNIHIKER K10 in extension——>board.
  
• Connect the K10, then restore device initial setting. The recovery process may take 3~5 minutes
  
• Download factory programme
  
• Unzip the programme and open it with Notepad/VSCode etc. and copy the entire contents.
  
• Paste it into the manual editing area of Mind+.
  
  
• Select the K10 and upload the code.